Review Lamborghini 350 GTV (1963)
First Lamborghini issued its products with prototype desaiin and pioneer GT 350, then this product is called the first Lamborghini production model. 350 GTV presented to the public during the 1963 Turin Auto Show.
Default 2013 Kawasaki Ninja 250R
The initial official photos of this green baby that were released in the latter half of 2012 didn’t leave any chance for disappointment. What the Kawasaki designers had pulled out was nothing short of a rabbit out of the hat.
Review Ferrari Testarossa F110
The vehicle should not be confused with the Ferrari TR "Testa Rossa" of the late 1950s and early 1960s, which is a sports car that ran in the world Sportscar Championship, including the 24 Hours of Le Mans.
Review Lamborghini Miura (1966)
Miura started was presented in 1965 at the Turin auto show, and the prototype P400 debuted in 1966 at the Geneva show. Miura was presented for reception of showgoers and automotive press. The second presentation of the Miura was impressed with the sleek style of Marcello Gandini and revolutionary cars mid engine design.
Review Ferrari F40
Ferrary F40 is a mid engine rear-wheel drive two-door coupé sports car built from 1987 to 1992 to 1996 for GTE (1994 to LM). The successor to the Ferrari 288 GTO, a car is designed to celebrate the 40th anniversary of the Ferrari cars and Ferrari's last personally approved by Enzo Ferrari.
September 1, 2015
Review Ferrari F40
August 21, 2015
Lamborghini 350GTV (1963) Review
First Lamborghini issued its products with prototype desaiin and pioneer GT 350, then this product is called the first Lamborghini production model. 350 GTV presented to the public during the 1963 Turin Auto Show. 350 GTV showing semi controversial fastback body designed by Giorgio Prevedi under the supervision of Franco Scaglione and built by some of the Sargiotto in Turin. Giorgio Neri and Luciano Bonacini build chassis frame tubes in Modena. Giotto automotive developed dry sump Racing 3.5 liter V12 engine specifications, with the output of 255 kW (347 PS, 342 bhp) at 8000 rpm, and torque 326 newton metres (240 ft • lbf), using the DIN standard measurements, for use in the car.
Ferruccio Lamborghini was dissatisfied with some of the 350 GTV design features, and with the State of tune the machine. He commissioned several tours for the redesign of the car became more practical and has a detuned engine for 270 brake horsepower (201 kW, 274 PS) at 6500 rpm to be used in a production car. The new body and the machine retuned in production of the first Lamborghini, GT 350.
Lamborghini 350 GTV continued with as only a Show-prototype. During the Assembly, labor found that body panels won't fit around the machine. Because he no longer plans to 350 GTV out into a Show car, the engine Bay had Lamboghini SWA with bricks and keep the hood closed the entire Turin Auto Show. Complete Car Show also lack the brake calipers, foot pedals and the windshield wiper.
After the 1963 Turin Auto Show, 350 GTV was placed into storage. 350 GTV remained in storage until the mid-1980s, when the car dealer and his cousin Bernandoni Romano, Lamborghini expert Stefano Pasini, convinced the management to sell 350 GTV to them. Bernandoni and Pasini did not accept the gauges and steering wheel with a car. They do, however, accept some proposals to modify car into running condition and received one. During the process of modification, the car's color changed from a pale blue metallic green original owners request.
350 GTV was then sold to a collector of Japan, who placed the car in the collection Tsubaki. A few years later, 350 GTV was put on display in the Museum of Lamborghini in Sant'Agata Bolognese, Italy.
Price $45000 - $89700
August 20, 2015
Default 2013 Kawasaki Ninja 250R: First Impression & ride report
So when the rumours of a face-lifted baby Ninja started to appear on the worldwide web, it did become the proverbial talk of the town. And with the expectations were already so high, the folks at Kawasaki had little choice but to come out with something that is as groundbreaking as the previous Ninja was.
We at xBhp got our hands on the newest baby Ninja, the 2013 Kawasaki Ninja 250R, in Philippines a few days back, thanks to the Motorcycle Magazine and Kawasaki Philippines. And boy, did it leave us speechless or what! Here’s our 2 cents on what we think of this bike.
Looks & Styling: The initial official photos of this green baby that were released in the latter half of 2012 didn’t leave any chance for disappointment. What the Kawasaki designers had pulled out was nothing short of a rabbit out of the hat. The 2013 Ninja 250R looked drop-dead gorgeous in pictures and does so in flesh. It’s got sharper looks like that of a supermodel that puts it in the league of the ZX-10Rs looks wise, and perhaps even better. The tank is even more chiselled, and so is the tail, and together they play a big role in giving the bike a very mean look. The rounded exhaust pipe gives way for an all new angular, powder coated, black exhaust pipe with a chrome heat-shield. The new pipe not only looks good, it also sounds a lot better, particularly once you rev the bike past the 5000 RPM mark. The previous singular-body headlight has been done away with and gives way to the angular twin headlight system that vaguely reminds one of its bigger sibling, the Ninja ZX10R. Then there’s the all new digital + analog console instead of the plain jane fully analog unit on the previous 250R. The new unit has a large analog tachometer, a smaller digital speedometer display that also has 2 tripmeters, an odometer and a digital clock too. The bike comes to life with a cool animation on the digital console as you turn on the key. The backlight color is moonlight white. The numbers on the digital unit were clearly visible while riding even during bright daylight. And finally, the baby Ninja also gets the much awaited ‘pass’ light switch that was missing on the older models.
August 18, 2015
Review Lamborghini Miura (1966)
July 31, 2015
Review Ferrari Testarossa F110
Testarossa is a two-door coupé premiered at the 1984 Paris Auto Show. All versions of the Testarossa had the power fed through the wheels from a rear-mounted, five-speed manual transmission. Middle rear engine, rear-wheel drive layout (engine between the axles but behind the cabin) keeps the center of gravity in the middle of the car, which increases stability and improves the ability of cornering the car, and thus results in a standing weight distribution 40% front: 60% rear. The original Testarossa back engineered for 1992 and released as the 512 TR, at the Los Angeles Auto Show, effectively as a completely new car, and weight distribution increased 41% front: 59% rear. [6 F512 M] was introduced at the 1994 Paris Auto Show. the car dropped the TR initials and added the M which in the language of Italy stood for modificata, or translated to modified, and the final version of the Testarossa, and continued its predecessor's weight distribution improvement 42% front: 58% rear. [8 M F512] is the last machine mid 12-cylinder car, apart from the F50, Ferrari Enzo Ferrari and LaFerrari, featuring the company's last flat engine. Testarossa was replaced in 1996 by a front-engined 550 Maranello coupé.
The vehicle should not be confused with the Ferrari TR "Testa Rossa" of the late 1950s and early 1960s, which is a sports car that ran in the world Sportscar Championship, including the 24 Hours of Le Mans.
Testarossa can trace its roots back to the mistakes of 1981 512i BB. The problem that the Testarossa was conceived to improve, including the cabin gets the more heat from the indoor plumbing that ran between the radiator and the engine mounted up front as they Mount and a lack of luggage space. To fix these problems Ferrari and Pininfarina designed the Testarossa became larger than its predecessor, the Boxer Sport. For example, in 1976 millimeters (78 in) width of the Testarossa was half a foot wider than the Boxer. This resulted in an increased wheelbase that stretched about 64 mm (2.5 inches) 2550 mm (100 inches) used to accommodate luggage in a carpeted storage space under the front forward-opening hood. The increased length creates extra storage space behind the seats in the cabin. Headroom is also increased with a roofline half an inch higher than the Boxer.
The design originated from Pininfarina. The design team at Pininfarina consists of Ian Cameron, Guido Campoli Ottina, Diego and Emanuele Nicosia. With little surprise, they were led by the head of the design of the Leonardo Fioravanti, designer of many contemporary Ferraris. The design comes from Nicosia, but Fioravanti guidance is equally important. Become a trained aerodynamist, Fioravanti applied that knowledge to set up the layout of the aerodynamics of the car. This means large side intakes is not only a statement of style but completely functional-they pull clean air to cool the radiator side and then go to the top and leave the car through ventilation holes located on the lid of the machine and the tail. As a result, the Testarossa doesn't require rear spoiler as Lamborghini Countach has not produced zero lift on the rear axle. Aerodynamic drag coefficient is 0.36 is also significantly better than Lamborghini 0.42.
Pininfarina's his body was curvaceous Boxer--a departure from the one that caused some controversy. They side is sometimes referred to as "cheese to be taken santannya" or "egg slicers," stretching from the doors to the rear fenders were needed for rules in some States that prohibit large openings on cars. Testarossa had twin radiators on the back with a machine rather than a single radiator up-front. in conjunction They provided cool air rear-mounted side radiators, thus keeping the engine from overheating. They also made Testarossa wider at the back than at the front, so as to increase stability and handling.
One last aside from unique new design is a high Mount rear view mirror on the driver's side. US based on cars, the mirror was lowered to a more normal placement in 1987 and quickly joined the passenger rear side mirrors from drivers to secure changes can make easy lane.
Like its predecessor, the Testarossa used double wishbone front and rear suspension systems.


September 01, 2015




